Teflon(PTFE) Heat Shrinkable Tubing
Teflon (PTFE) Heat Shrinkable Tubing, half hard, flame retardant, can use for a long time under the high temperature of200℃, almost resistance all the oil and Chemical.
Technical data
Property | Test method | Test data |
| Tensile strength/Mpa | IEC811-1-1 | 19 |
| Elongation at break% | IEC811-1-1 | 200 |
| Axial shrinkage rate | ASTM D 2671 | ±15% maximum |
| Secant factor/Mpa | ASTM D 2671 | 750 maximum |
| Anti-aging at Hight temperature(300℃,168h) | IEC811-1-2 | No cracking, no flow |
| Adaptability at low temperature | ASTM D 2671 | Minus 65,no carking |
| Insulation force | VDE 0303 Part2 | 26KV/mm |
| Volume resistanceΩ .com | VDE 0303 Part3 | 10^19 |
| Corrosion resistance | ASTM D 2671 | No ccrrosion |
Application
PTFE Heat Shrinkable Tubing can be widely used in science &technology field, such as chemistry. mechanical industries, astronautic industry, vehicles,transformers, communications, etc.
High temperature resistant PTFE PTFE heat shrinkable tube RSTFE (1.7:1) specification sheet
Specific ation | Minimum inside diameter beford shrinkable(mm) | After shrinkable | Standard package | MOQ | |
| Maximum inside diameter（mm） | Wall thickness（mm） | ||||
Φ1.0 | 1.0±0.2 | 0.5 | 0.25±0.05 | 100 | 300 |
Φ2.0 | 2.0±0.2 | 1.3 | 0.30±0.05 | 100 | 300 |
Φ3.0 | 3.0±0.2 | 1.8 | 0.30±0.05 | 100 | 300 |
Φ4.0 | 4.0±0.3 | 2.5 | 0.30±0.05 | 100 | 300 |
Φ5.0 | 5.0±0.3 | 3 | 0.40±0.05 | 100 | 300 |
Φ6.0 | 6.0±0.3 | 3.9 | 0.40±0.05 | 100 | 300 |
Φ7.0 | 7.0±0.3 | 4.4 | 0.40±0.05 | 100 | 300 |
Φ8.0 | 8.0±0.3 | 4.9 | 0.40±0.05 | 1.22 | 100 |
Φ9.0 | 9.0±0.3 | 5.4 | 0.40±0.05 | 1.22 | 100 |
Φ10.0 | 10.0±0.3 | 6.1 | 0.40±0.05 | 1.22 | 100 |
Φ11.0 | 11.0±0.3 | 6.8 | 0.40±0.05 | 1.22 | 100 |
Φ12.0 | 12.0±0.5 | 7.6 | 0.40±0.05 | 1.22 | 100 |
Φ15.0 | 15.0±0.5 | 8.6 | 0.50±0.05 | 1.22 | 100 |
| Φ18.0 | 18±0.8 | 10.6 | 0.50±0.05 | 1.22 | 100 |
| Φ20.0 | 15±0.8 | 11.8 | 0.50±0.05 | 1.22 | 100 |
Teflon heat shrinkable sleeve specification sheet (shrink ratio 4:1)
Specific ation | Minimum inside diameter beford shrinkable(mm) | Wall thickness after chrinkable | Inside diameter after shrinkable | |
Thin | Thick | |||
Φ1.0 | 1.0±0.2 | 0.5 | 0.1 | 0.4±0.1 |
Φ2.0 | 2.0±0.2 | 0.5 | 0.12 | 0.5±0.1 |
Φ3.0 | 3.0±0.2 | 0.5 | 0.12 | 0.7±0.1 |
Φ4.5 | 4.0±0.2 | 0.5 | 0.12 | 1.2±0.1 |
Φ6.0 | 6.0±0.2 | 1.2 | 0.12 | 1.5±0.1 |
Φ7.0 | 7.0±0.2 | 1.2 | 0.15 | 2.8±0.1 |
Features
1, applicable temperature range: -80 ° C ~ 250 ° C
2, semi-hard, flame retardant, long-term use at 200 ° C
3, high mechanical strength, wear resistance, high pressure resistance, corrosion resistance, almost all oils and chemicals
4, standard color: transparent, other colors can be customized
5, FEP heat shrinkable tube, PVDF (polyvinylidene fluoride) heat shrinkable tube can be customized
关闭返回